Supplier![]() | Product | Category | SubCategory | Company | Diagram | Reference | Description |
| Midland Railway Centre | Tools & Materials | | | | | AAT0/3 | AXLE ALIGNMENT TOOL - Set of 3 dummy axles, springs & washers. |
| Midland Railway Centre | Tools & Materials | | | | | AAT0 | AXLE ALIGNMENT TOOL - Additional axle set |
| Midland Railway Centre | Tools & Materials | | | | | WQJ32 | Wheel Quartering Jig (32mm gauge) |
| Midland Railway Centre | Tools & Materials | | | | | RRB0 | Rolling Road Module B - (medium) - supports a 4-wheel bogie. |
| Midland Railway Centre | Tools & Materials | | | | | RRD0 | Rolling Road Module D - for driving wheels. Each block has 4 ball races to support the driving axle. |
| Midland Railway Centre | Tools & Materials | | | | | RRP0 | Rolling Road Module P - (short) - supports a single-axle pony truck |
| Midland Railway Centre | Tools & Materials | | | | | RRT0 | Rolling Road Module T - (long) - for tenders. This will accommodate the longest (British) tender. |
| Midland Railway Centre | Tools & Materials | | | | | RR4620 | Rolling Road Modules for 4-6-2-tender loco |
| Midland Railway Centre | Tools & Materials | Forming tools & jigs | | | | RET7 | Rivet embossing tool |
| Midland Railway Centre | Tools & Materials | Forming tools & jigs | | | | PA7 | Punch & anvil set for 0 scale (7mm). Produces a rivet head 0,7mm (.028in.) dia. |
| Midland Railway Centre | Tools & Materials | Forming tools & jigs | | | | MF7 | Mini-folders - Primarily intended for folding sheet metal where the fold line is etched or engraved (e.g. in model kits). Consists of a pair of heavy steel bars, bolted together at their ends, between which the metal to be folded is gripped. Capacity (length) 178mm. (7in.);
|
| Midland Railway Centre | Tools & Materials | Forming tools & jigs | | | | MF13 | Primarily intended for folding sheet metal where the fold line is etched or engraved (e.g. in model kits). Consists of a pair of heavy steel bars, bolted together at their ends, between which the metal to be folded is gripped. Capacity (length) 330mm. (13in.);
|
| Midland Railway Centre | Tools & Materials | Forming tools & jigs | | | | HNT | HAND NIBBLER TOOL
Width of cutting blade 2,5mm (.098in.) Max. capacity (mild steel) 1,2mm (.048in.) |
| Midland Railway Centre | Tools & Materials | Forming tools & jigs | | | | NT | NOTCHING TOOL*
A very useful tool for cutting out irregular shapes, or producing large holes (round or rectangular) in sheet metal. Will handle mild steel, brass, nickel-silver, aluminium, plastics, up to 1,2mm (.048in.) thick. Especially useful for cutting out window apertures etc.
Width of cut 6mm (.236in.), depth of cut 1,6mm (.064in.). For apertures, it is first necessary to drill a hole of 11mm. (.440in.) dia. |
| Midland Railway Centre | Tools & Materials | Forming tools & jigs | | | | WFT | WIRE-FLATTENING TOOL
A clever device for squeezing soft wire (brass, silver or copper) into flat strip. The wire is threaded between the rollers and tensioned with a steady pull whilst applying pressure to the handles. Typical uses for flattened wire include boiler bands for model locomotives, rain strips and beading for carriages, jewellery making.
Max. wire diameter 1,0mm (.040in.) |
| Midland Railway Centre | Tools & Materials | Forming tools & jigs | | | | DT6 | DRILLING TABLE
A simple solution to the problem of holding small, thin pieces when drilling. The table has a matrix of tapped holes into which are attached clamps. The clamps hold the parts safely and securely, thus eliminating the risk of injury to the fingers. Useful for holding two or more stacked components which must be drilled exactly the same. Small table has two clamps, the larger one has four. Additional clamps are available separately. The clamps have vee grooves to enable round bar to be held.
Table size 152 x 63mm (6 x 2.5in.) Includes 2 clamps (illustrated). |
| Midland Railway Centre | Tools & Materials | Forming tools & jigs | | | | DT12 | DRILLING TABLE
A simple solution to the problem of holding small, thin pieces when drilling. The table has a matrix of tapped holes into which are attached clamps. The clamps hold the parts safely and securely, thus eliminating the risk of injury to the fingers. Useful for holding two or more stacked components which must be drilled exactly the same. Small table has two clamps, the larger one has four. Additional clamps are available separately. The clamps have vee grooves to enable round bar to be held.
Table size 305 x 63mm (12 x 2.5in.) Includes 4 clamps. |
| Midland Railway Centre | Tools & Materials | Forming tools & jigs | | | | RFA6 | Radius forming attachment for DT6 Drilling table |
| Midland Railway Centre | Tools & Materials | Forming tools & jigs | | | | RFA12 | Radius forming attachment for DT12 Drilling table |