Site Tools


gazettearchive:gazettevol20:darstead-br-mk1coaches

Darstaed RTR BR Mark 1 Mainline Coaches


Reviewed by Robin McHugh - Gazette May 2018 (Vol 20 No.7)
Loaned by Ellis Clark Trains
Darstaed

When Ellis Clark got in touch to ask if the Gazette would like a sample of the new Darstaed coaches for review, I was pleasantly surprised. The vast majority of our reviews come as a result of members writing about a recent purchase or build experience. I was even more surprised when the parcel arrived, not one, but four coaches were in the package. What came was one of the initial sets comprising two corridor brake seconds, a corridor second and a corridor composite, beautifully presented in four individual blue boxes inside a larger box that conveniently keeps them together and comes with a stout handle for easy carrying. These models are the result of some three years of development, starting initially as a coarse scale venture, they have blossomed into fine scale models.

The prototype

BR Mark 1 coaches first went into revenue service in the spring of 1951, the better part of 70 years ago. They outlasted contemporary introductions like the standard steam loco classes, all of the early and many later diesels and even the humble 16 ton mineral wagons, and there can be no comparison whatsoever with their contemporary road vehicles. They were built in various BR workshops and by number of private firms including Cravens, Metropolitan Cammell and the Birmingham Railway Carriage and Wagon Co, and construction ceased in the first half of the 1960s. Initially they worked prestige services but were soon to be seen across the UK on all kinds of passenger services. Their longevity has made them an attractive proposition as models and nowadays the fact that they are still in daily use with heritage railway companies surely means there must be few with an interest in railways who haven’t travelled in at least one.

What’s in the box?


Set 1, reviewed here, contains four coaches that form the basis of typical prototype train makeups. This will be joined later by Set 2 that comprises a restaurant open first, a restaurant open second and a restaurant kitchen. Also coming are sleeping cars, a buffet, corridor first, brake composite, tourist second open and a full brake, the latter on the correct 57 foot underframe. All will be available in a selection of liveries from the original crimson and cream, through maroon, green, chocolate and cream, corporate blue and grey to the very colourful Intercity versions that appeared before privatisation. Coaches are available individually as well as in sets. Brake coaches have detachable, plug in lighted tail lamps.

A mixture of etches, mouldings and diecastings is used and in the main, the parts are screwed and/or clipped together. The etched sides are beautifully painted and lined to a standard that most of us would fail to match. The underframe trussing and fittings, ends, roof and roof fittings are self-coloured ABS mouldings, black or grey as appropriate and the ingenious, working corridor connections are a rubbery material. The floor pan, solebars and steps are metal, I daren’t scrape the paint off to see what type, and the bogies are diecast metal with very free running, turned metal, wheels on pinpoint axles in brass bearings. The bogies are compensated and the sideframes are screwed to the central frame. Brake shoes and hangers are fitted and are in line with the wheels but no operating gear is present. One bogie has pickups for the interior lighting and there is a miniature slide switch to turn lights off and on. The bogies are mounted to provide a three point suspension, one allows fore and aft rocking and the other side to side, resulting in a very smooth and completely wobble free ride.
There is a compromise at the headstocks (buffer beams). The oval buffers are sprung and use a slot and tab to prevent rotation. Kadee automatic couplings are fitted and for this reason the centre area of the headstock is not modelled, this being to allow sideways movement of the couplings on tight radius curves. The couplings are attached to the floor with screws and there are three settings with the closest one being used as a factory default. This means that when you place the coaches on the track, straight from the box, the gangways connect in a most realistic fashion and stay connected as there are magnets that ensure things stay together. I ran the set on curved track that is nominally five foot radius, in other words, some of it is perhaps a bit tighter, and over double crossovers with Peco points and the running was simply superb, pulled or pushed. Replacement screw couplings are available from Ellis Clark if Kadees are not desired. I fitted one of these to one of the BSKs to allow coupling to a locomotive for test purposes; a five minute job once I located the correct screwdriver.

There is a compromise at the headstocks (buffer beams). The oval buffers are sprung and use a slot and tab to prevent rotation. Kadee automatic couplings are fitted and for this reason the centre area of the headstock is not modelled, this being to allow sideways movement of the couplings on tight radius curves. The couplings are attached to the floor with screws and there are three settings with the closest one being used as a factory default. This means that when you place the coaches on the track, straight from the box, the gangways connect in a most realistic fashion and stay connected as there are magnets that ensure things stay together. I ran the set on curved track that is nominally five foot radius, in other words, some of it is perhaps a bit tighter, and over double crossovers with Peco points and the running was simply superb, pulled or pushed. Replacement screw couplings are available from Ellis Clark if Kadees are not desired. I fitted one of these to one of the BSKs to allow coupling to a locomotive for test purposes; a five minute job once I located the correct screwdriver.





Dimensions

Prototype Model
Length over headstocks 63ft 5in 63ft 0in (441mm)
Bogie centres 46ft 6in 45ft 7in (320mm)
Bogie wheelbase BR 1 8ft 6in 8ft 6in (59.6mm)
Wheel Diameter 3ft 6in 21.8mm on tread/23.95mm over flange
Wheel width N/A 3.65mm
Back to back N/A 29mm
Flange thickness N/A 0.75mm
Height above railhead to:
Top of roof arc 12 ft4 ½in 12ft 8in (89.4mm)
Top of guard’s periscope 12ft 8in 13ft 1in (94mm)
Body widths:
At floor 8ft 8 ½in 8ft 11in (62.7mm)
Maximum 9ft 0in 9ft 2in (63.9mm)
At cantrail 8ft 7in 8ft 7in (61.5mm)

Weight of model (CK) 1021g

The prototype measurements are as given in Keith Parkin’s book on the story of BR mark 1 coaches published by HMRS/Atlantic.

The BR 1 bogie as fitted is unfortunately somewhat wide across the axleboxes. At 58.3mm this scales out at around 8ft 4in where it should be 7ft 7in. This caused no problems with running past curved platforms of a six foot radius. The appearance might cause offence to some and I am advised that this is a consequence of the models initially being designed as not finescale ones. The Commonwealth style bogies that will be fitted to the blue/grey and Intercity liveried versions will be more accurately dimensioned. The overall height, and some widths, of the model are slightly overscale. The enigmatic crimson and cream livery has been very well caught although I perceive the cream band as being a bit wide. I could not find this dimension for the prototype, but I’d like a fraction more crimson. That said, reds are my favourite colour!

Interior detail includes the corridor screen, seating, red in second class, blue in first, and coloured compartment furnishings such as mirrors, lamps and hat racks. This is achieved with paper overlays and looks effective. The glazing is very secure and grills are printed on the inside of the appropriate windows in above the compartments and as already mentioned, is switchable off and on via one of the bogies.


Supplied with the coaches is a 20 page booklet giving a potted history of Mark 1 stock, details of the proposed range and liveries, instructions on how to gain access to the interior, basic maintenance tips and a little information on Darstaed itself. There is also a bespoke sheet of waterslide transfers for each coach type. The coaches are supplied unnumbered so the purchaser has a little bit of work to do, but not too much. A selection correct numbers is provided, four of each for the main regions that the coaches were allocated to, Eastern, Western, Midland and Southern. There are also individual numerals to allow further variation as well as NE and the rare GE prefixes.

Disappointingly, there is an absence of SC prefixes and of ‘Load xxTons Distributed’ (for brake vans). There are ‘No Smoking’ signs and two versions of ‘InterCity’ and yellow stripes for the cantrail area on first class sections, along with full instructions on applying the transfers.

To sum up, these Mark 1s are an impressive addition to the ever increasing range of RTR stock. If they’re on your wish list, get them while you can. They look the part, the proportions and shape being excellent both to my eyes, and to a number of other Guild members who had a chance to form an opinion while I had a loan of the models. I think the construction methodology is a tour de force.



Darstaed

The company was founded in Switzerland in 1966 by Marcel Darphin to manufacture replicas of pre-war Marklin coaches. Later they went on to produce a variety of European rolling stock in O gauge finescale. In 1993 the company was purchased by Mr Andries Grabowsky who had been involved in manufacturing HO models in the Netherlands, winning a first prize at the Nuremburg toy fair in both 1991 and 1992. In 1996, following an upsurge of interest in modern vintage style tinplate trains, Darstaed produced their first UK models and in 2016, their 50th anniversary year, it was decide to expand once again to include O gauge, two rail finescale.
A copy of the review was passed to Ellis Clark. Ellis declared that they were happy with the clarity of the review and stated that the Darstaed philosophy is to produce realistic, value for money, models.

gazettearchive/gazettevol20/darstead-br-mk1coaches.txt · Last modified: 2021/09/22 14:16 by 127.0.0.1